OXA decentralised heating and ventilation systems
Climate control for buildings 6 to 30 metres tall — with no ductwork. Heat, cooling and fresh air arrive where people actually work, instead of collecting under the roof.
Why tall buildings stay cold and uneven
Radiators only warm the perimeter
Convective heat reaches roughly 5 m from the wall. The middle of the warehouse or production hall stays cold — while the energy bill has already been paid.
Unit heaters create hot spots and draughts
A direct jet produces local overheating next to the unit and cold, windy zones further out. Comfort suffers, staff complain, and the temperature never settles.
Central systems end up heating the roof
Warm air rises and builds up under the roof deck. You pay to heat the structure rather than the occupied zone — and pay again for the ductwork that delivers it.
The OXA answer: vortex air distribution
The unit is mounted directly above the occupied zone and generates a swirling, long-throw air stream. The vortex punches through the layer of stagnant warm air, carries the air down to floor level and then opens out into an even field — no ductwork, no draughts.
| Mounting height | 6–30 m |
| Coverage radius per unit | >10 m |
| Occupied zone | up to 2 m above the floor |
| Diffuser | 3-in-1 adaptive, blades 0–90° |
25–30%
less air volume moved
>10 m
throw radius of a single unit
1024
units on one control terminal
<60 dB
sound pressure level
Series by the job they do
Heating + cooling
- OXA-K — water, ceiling-mounted
- OXA-SK — water, side discharge
- OXA-530N/670N — DX, ceiling-mounted
- OXA-440N/620N — DX, side discharge
Where OXA is used
Controls and automation
Wireless control
OXA-V and OXA-V2 terminals with OXA-T2 sensors, with no signal cabling to pull. Up to 1,024 units in a single system.
BMS integration
Modbus RTU / TCP: setpoints, operating status and alarms are passed straight into the building management system.
Mobile app
Unit status, schedules, setpoint changes and fault notifications — all from a smartphone.
About Mycond
Mycond Limited is a British climate equipment brand headquartered in London. Manufacturing runs through partner plants in Europe and Asia — Poland, Italy, China and Malaysia. EBM-papst fans, Belimo actuators, copper-and-aluminium heat exchangers. Aklima Polska is the official distributor in Poland. About the company →
OXA equipment selection
Send us the basics of your building: floor area, ceiling height, what the space is used for and the energy source available (water, electricity, gas or refrigerant). You will get back the recommended series, the number of units and a suggested layout.
Head office: Mycond Limited, London · Official distributor in Poland: Aklima Polska, +48 502 121 436
Head office — London
MYCOND LIMITED
42-44 Bishopsgate, London, EC2N 4AH, United Kingdom
+44 745 814 8214
info@mycond.eu
Poland — Aklima Polska
+48 502 121 436
info@aklimapolska.pl
ul. Postępu 15, 02-676 Warsaw
Poland